Pianos consistently make movers yearly list of items that are most frequently damaged. Grand pianos are specifically troublesome. Practicing the following procedures for dismantling, padding and filling grand pianos will prevent damage, lower claims expense, and enhance customer fulfillment.
1) At least 3 people are needed to handle a child grand piano. If the baby grand piano requires to increase or down stairs or if a full or show grand piano needs to be carried, a minimum of four people are required.
2) Constantly complete a extensive and accurate inventory. It might be preferable or required to utilize a visual stock to adequately describe and show pre-existing damage.
3) As different parts are disassembled, please place all hardware in an appropriately identified parts bag and after that position the parts bag in a "Components Box".
4) Get rid of the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furniture pad.
5) Detach the cover by eliminating the hinge pins. Wrap the lid in a tidy furniture pad.
6) Remove the prop that holds the cover open and cover it in a clean furniture pad. The prop has a hinge pin and remains in two pieces.
7) Remove the pedal assembly and cover it in a clean furnishings pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please take care not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Keep in mind: If masking tape is unavailable, please use properly labeled parts bags for this function. When reassembling at location, please make sure to put the rods in the appropriate order so that the pedals will work effectively.
8) Pad the piano by placing a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you manage the piano. Note: Please ensure that the surface of the piano is dust-free before padding it.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board ought to be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning one person below the piano at the left end of the keyboard. Be sure to have two individuals lifting the corner of the piano while the 3rd individual eliminates the leg. Keep in mind: Please be sure to note which legs were eliminated from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please be sure to raise the whole piano slightly while completing this maneuver to avoid excessive pressure on the staying, attached legs as the piano suggestions. Raise the piano to an upright position on the board. Note: Please ensure that the soundboard is protected prior to raising. Make certain that the piano is focused comfortably versus the brace at the end of the piano board. Note: Never leave the piano unattended. Always have at least a single person holding the piano consistent at all times.
12) Get rid of the 2 staying legs and cover them in clean furniture pads. These legs are held in location by a "essential and slot" arrangement. To remove the leg, slide it inward towards the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and securing them. Place folded burlap pads over the furnishings pads but under the straps to provide extra security to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for security versus home damage, position the keyboard end of the piano toward the bottom of the stairs. Attach a hump strap to the leading end of the piano board to prevent the piano from slipping.
16) To pack the piano, leave it on the piano board and place it in a tier as the very first base product with the keyboard facing the wall of the preceding tier. The very best place to pack the padded cover is in between the piano and the preceding tier or between visit the wall and the piano.
Although grand pianos represent a considerable obstacle, they can be moved without damage by utilizing typical sense and practicing the treatments listed above.